Cyclone Diesel Performance Diesel Performance Parts

AEM

Here are a few random products from your menu choice.


Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

 
For a more extensive search and listing of all of our products. Please visit our on-line store.
    Analog H2O Flow Gauge. 0~1000cc
Analog H2O Flow Gauge. 0~1000cc
Analog H2O Flow Gauge. 0~1000cc
Part #: 30-5142
Our Price: $221.00

Buy Now

If you are using a Water/Methanol Injection System and want to know exactly how much fluid you are actually injecting into your engine, the AEM Water/Methanol Flow Gauge is a must. It replaces the "dummy light" with actual data displayed on a smooth moving needle-type gauge that allows you to accurately monitor the status of your injection system in real time. The AEM Water/Methanol Flow Gauge comes with black and silver bezels and white and black faceplates for multiple color combinations.

The gauge kit includes a precision flow sensor and fittings for use with 1/4" OD nylon tubing, so the AEM Water/Methanol Flow Gauge fits most Water/Methanol injection kits on the market today.

For best results the 0-1000CC Flow Gauge (AEM part# 30-5142) should be used on Water/Methanol kits injecting more than 500 cc/min and is ideal for those with the AEM Water/Methanol kit using the largest size or multiple sized nozzles. If you are using only a small or medium AEM nozzle, we suggest the 0-500CC Flow Gauge (AEM part# 30-5141).

    Analog H2O Flow Gauge. 0~500cc
Analog H2O Flow Gauge. 0~500cc
Analog H2O Flow Gauge. 0~500cc
Part #: 30-5141
Our Price: $221.00

Buy Now

If you are using a Water/Methanol Injection System and want to know exactly how much fluid you are actually injecting into your engine, the AEM Water/Methanol Flow Gauge is a must. It replaces the "dummy light" with actual data displayed on a smooth moving needle-type gauge that allows you to accurately monitor the status of your injection system in real time. The AEM Water/Methanol Flow Gauge comes with black and silver bezels and white and black faceplates for multiple color combinations.

    Water/Methanol Injection Check Valve Kit
Water/Methanol Injection Check Valve Kit
Water/Methanol Injection Check Valve Kit
Part #: 30-2155
Our Price: $19.50

Buy Now
The AEM Water/Methanol Check Valve kit works with any 1/4" OD water/water injection tubing, and is typically used used as a replacement or upgrade part for nearly any water/methanol injection kit. 
    Water/Methanol Injection HD Controller
Water/Methanol Injection HD Controller
Water/Methanol Injection HD Controller
Part #: 35-4513HD
Our Price: $143.40

Buy Now
Water/Methanol Injection HD Controller
    Water/Methanol Injection Standard Controller
Water/Methanol Injection Standard Controller
Water/Methanol Injection Standard Controller
Part #: 35-4513
Our Price: $143.40

Buy Now
Water/Methanol Injection Standard Controller
    Water/Methanol Injection 5 Gallon Tank Kit
Water/Methanol Injection 5 Gallon Tank Kit
Water/Methanol Injection 5 Gallon Tank Kit
Part #: 30-3010
Our Price: $139.00

Buy Now
The AEM Water / Methanol Injection Kit is universal by design and adapts to virtually any gas or diesel engine via multiple jets to suit your vehicle’s power requirements. Reduces air inlet and exhaust-gas temperatures, which allows you to increase boost pressure and advance timing without having to run higher-octane fuel. It’s like getting to run 100+ octane gas for the price of Premium! Includes all the features necessary to do water/methanol injection right. No hidden costs or optional components are required. Unlike other popular kits on the market, we include a one- or five-gallon tank with a fluid level sensor standard. Also, because we think engine protection is a requirement, not an option, we include our Boost Safe output in every controller we design. This feature allows you to retard timing or reduce boost if the system runs out of fluid or detects an error. With the AEM Water / Methanol Injection Kit, you get all the best features in one low priced kit. Once installed, the Water / Methanol Injection Kit uses a boost-dependent, variable-flow progressive controller to determine the amount of water / methanol mixture (up to 50%) to feed into the inlet stream from the included one- or five-gallon reservoir. The controller commands a progressive 150-PSI pump that delivers the mixture, and flow adjustments at the inlet are made via three included jets designed to match most engine power requirements. The result is significant horsepower gains using pump gas—at about half the cost of Racing Fuel. It includes everything you need to adapt it to your steed. Critical safety features are integrated into the system to virtually eliminate any chance of failure, including an integral fluid level sensor in the reservoir, a dash light to warn of low fluid level or error codes (including short circuits, battery voltage and more), and an additional output to either decrease ignition timing or boost if the system detects low fluid levels or a system error.
    Water/Methanol Injection 1 Gallon Tank Kit
Water/Methanol Injection 1 Gallon Tank Kit
Water/Methanol Injection 1 Gallon Tank Kit
Part #: 30-3011
Our Price: $69.95

Buy Now
AEM Water/Methanol Injection Kits reduce air inlet temperatures which allows users to increase boost pressure (and advance timing on forced induction gas applications) to create more power by utilizing the cooling effects of the system under heavy load. The kit is offered in 2 configurations: a 1-Gallon kit for racecar applications, and a 5- Gallon HD kit for Diesel applications or racecars requiring extended range. Both kits include all the elements necessary to do water/methanol injection right, including a standard fluid level sensor for the tank, recirculation-style pump, feature-loaded controller, and complete hardware for installation on practically any diesel or gas application. For users who intend to use a custom or existing reservoir, AEM also offers a "tankless" pump and jet kit. There are no hidden costs or additional components required.
    Water/Methanol Injection 200psi Recirculation Pump
Water/Methanol Injection 200psi Recirculation Pump
Water/Methanol Injection 200psi Recirculation Pump
Part #: 30-3015
Our Price: $132.75

Buy Now
Water/Methanol Injection 200psi Recirculation Pump
    Water/Methanol Injection Nozzle & Jet Kit
Water/Methanol Injection Nozzle & Jet Kit
Water/Methanol Injection Nozzle & Jet Kit
Part #: 30-3012
Our Price: $61.10

Buy Now
The AEM Water/Methanol Injection Nozzle kit works with any 1/4" OD water/water injection tubing, and is typically used to add a second injector to an existing kit, but it can also be used as a replacement or upgrade part for nearly any water/methanol injection kit. 
    Water/Methanol Injection Inline Filter
Water/Methanol Injection Inline Filter
Water/Methanol Injection Inline Filter
Part #: 30-3003
Our Price: $29.00

Buy Now
The AEM Water/Methanol Injection Filter is an in-line filter that uses a micronic mesh screen to filter particulates as small as 40 microns. This allows a cleaner flow of water/methanol to be passed into the engine, not only protecting the internals of the engine itself, but also the working parts of the water/methanol pump too. Run the AEM Water/Methanol Injection Filter in-line before the pump to protect both pump and engine. If you are using a Water/Methanol Injection System it may greatly increase pump life to use a water/methanol filter. The AEM Water/Methanol Injection Filter prevents foreign particles as small as 40 microns from clogging or damaging pumps, injection nozzles check valves or flow sensors. The AEM Water/Methanol Injection Filter uses fittings for use with 1/4inches OD nylon tubing, so it fits most Water/Methanol injection kits on the market today.
    Gauge Boot - 52mm. Universal Weather Resistant Gauge Boot
Gauge Boot - 52mm. Universal Weather Resistant Gauge Boot
Gauge Boot - 52mm. Universal Weather Resistant Gauge Boot
Part #: 30-8444
Our Price: $6.95

Buy Now
AEM Digital Gauges feature 24 color-coded LED display lights that provide immediate reference to monitored engine function. Each gauge includes interchangeable black & white faceplates and black & silver bezels (excluding Wideband Air/Fuel Display Gauges) to customize the gauge's appearance. A 0-5V analog output is included for use with data loggers and virtually any engine management system. A three-digit digital readout is designed for quick reference and an auto-dimming / read out lighting feature is built-in. Gauges do not require a laptop for monitoring.
    Water/Methanol Injection Monitor System - Metric 4mm
Water/Methanol Injection Monitor System - Metric 4mm
Water/Methanol Injection Monitor System - Metric 4mm
Part #: 30-3020M
Our Price: $277.72

Buy Now
Water/methanol injection users now have the sophisticated safety system they’ve always needed in an easy to use package.  Unlike most competitor systems that only check flow at a single point, AEM’s Injection Monitor is a smart system that monitors the entire flow curve.  Flow versus injection rate data is continuously collected and any deviation away from an acceptable baseline flow curve will trigger an alarm output.  This output can be used to reduce boost, pull timing, switch maps, or any other function to protect an engine from harmful detonation in the event there is an unsafe operating condition.
    Water/Methanol Injection Monitor System - SAE 1/4"
Water/Methanol Injection Monitor System -  SAE 1/4
Water/Methanol Injection Monitor System - SAE 1/4"
Part #: 30-3020
Our Price: $277.72

Buy Now
Water/methanol injection users now have the sophisticated safety system they’ve always needed in an easy to use package.  Unlike most competitor systems that only check flow at a single point, AEM’s Injection Monitor is a smart system that monitors the entire flow curve.  Flow versus injection rate data is continuously collected and any deviation away from an acceptable baseline flow curve will trigger an alarm output.  This output can be used to reduce boost, pull timing, switch maps, or any other function to protect an engine from harmful detonation in the event there is an unsafe operating condition.
    Water/Methanol Injection Kit
Water/Methanol Injection Kit
Water/Methanol Injection Kit
Part #: 30-3002
Our Price: $373.95

Buy Now
AEM is proud to announce the release of its Water/Methanol Injection Pump and Jet Kit. This kit comes with all of the components needed to do a complete water/methanol injection system excluding a reservoir. So in the case you'd like to use a custom reservoir or an existing reservoir in your vehicle such as the windshield washer reservoir, you'll get exactly what's needed.
    Water/Methanol Injection Kit with 5 Gallon Tank
Water/Methanol Injection Kit with 5 Gallon Tank
Water/Methanol Injection Kit with 5 Gallon Tank
Part #: 30-3001
Our Price: $550.00

Buy Now
The AEM Water / Methanol Injection Kit is universal by design and adapts to virtually any gas or diesel engine via multiple jets to suit your vehicle’s power requirements. Reduces air inlet and exhaust-gas temperatures, which allows you to increase boost pressure and advance timing without having to run higher-octane fuel. It’s like getting to run 100+ octane gas for the price of Premium! Includes all the features necessary to do water/methanol injection right. No hidden costs or optional components are required. Unlike other popular kits on the market, we include a one- or five-gallon tank with a fluid level sensor standard. Also, because we think engine protection is a requirement, not an option, we include our Boost Safe output in every controller we design. This feature allows you to retard timing or reduce boost if the system runs out of fluid or detects an error. With the AEM Water / Methanol Injection Kit, you get all the best features in one low priced kit. Once installed, the Water / Methanol Injection Kit uses a boost-dependent, variable-flow progressive controller to determine the amount of water / methanol mixture (up to 50%) to feed into the inlet stream from the included one- or five-gallon reservoir. The controller commands a progressive 150-PSI pump that delivers the mixture, and flow adjustments at the inlet are made via three included jets designed to match most engine power requirements. The result is significant horsepower gains using pump gas—at about half the cost of Racing Fuel. It includes everything you need to adapt it to your steed. Critical safety features are integrated into the system to virtually eliminate any chance of failure, including an integral fluid level sensor in the reservoir, a dash light to warn of low fluid level or error codes (including short circuits, battery voltage and more), and an additional output to either decrease ignition timing or boost if the system detects low fluid levels or a system error.
    Water/Methanol Injection Kit with 1 Gallon Tank
Water/Methanol Injection Kit with 1 Gallon Tank
Water/Methanol Injection Kit with 1 Gallon Tank
Part #: 30-3000
Our Price: $439.00

Buy Now
The AEM Water / Methanol Injection Kit is universal by design and adapts to virtually any gas or diesel engine via multiple jets to suit your vehicle’s power requirements. Reduces air inlet and exhaust-gas temperatures, which allows you to increase boost pressure and advance timing without having to run higher-octane fuel. It’s like getting to run 100+ octane gas for the price of Premium! Includes all the features necessary to do water/methanol injection right. No hidden costs or optional components are required. Unlike other popular kits on the market, we include a one- or five-gallon tank with a fluid level sensor standard. Also, because we think engine protection is a requirement, not an option, we include our Boost Safe output in every controller we design. This feature allows you to retard timing or reduce boost if the system runs out of fluid or detects an error. With the AEM Water / Methanol Injection Kit, you get all the best features in one low priced kit. Once installed, the Water / Methanol Injection Kit uses a boost-dependent, variable-flow progressive controller to determine the amount of water / methanol mixture (up to 50%) to feed into the inlet stream from the included one- or five-gallon reservoir. The controller commands a progressive 150-PSI pump that delivers the mixture, and flow adjustments at the inlet are made via three included jets designed to match most engine power requirements. The result is significant horsepower gains using pump gas—at about half the cost of Racing Fuel. It includes everything you need to adapt it to your steed. Critical safety features are integrated into the system to virtually eliminate any chance of failure, including an integral fluid level sensor in the reservoir, a dash light to warn of low fluid level or error codes (including short circuits, battery voltage and more), and an additional output to either decrease ignition timing or boost if the system detects low fluid levels or a system error.
    05-06 Dodge Brute Force Intake System
05-06 Dodge Brute Force Intake System
05-06 Dodge Brute Force Intake System
Part #: 21-8211DP
Our Price: $329.50

Buy Now

Brute Force Intake System

Dodge 05-06 Ram Diesel 5.9L Cummins

Product Style: AEM Brute Force Intake System
Color: Polished
Replacement Filter: 21-3059DK

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

    05-06 Dodge Brute Force Intake System
05-06 Dodge Brute Force Intake System
05-06 Dodge Brute Force Intake System
Part #: 21-8211DC
Our Price: $329.50

Buy Now

Brute Force Intake System

Dodge 05-06 Ram Diesel 5.9L Cummins

Product Style: AEM Brute Force Intake System
Color: Gunmetal Gray
Replacement Filter: 21-3059DK

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

    03-04 Dodge Ram Brute Force Air Induction System
03-04 Dodge Ram Brute Force Air Induction System
03-04 Dodge Ram Brute Force Air Induction System
Part #: 21-8206DC
Our Price: $319.30

Buy Now

Fits: 03-04 Dodge Ram Diesel 5.9L Cummins

Product Style: AEM Brute Force Intake System
Color: Gunmetal Gray

Replacement Filter: 21-2059DK

Features:

  • The AEM Brute Force Air Intake System is custom-designed and tuned for your specific truck or SUV large displacement engine
  • The Brute Force is crafted in the USA
  • CNC Mandrel-bent 6061 aluminum tubing guarantees the Brute Force has optimum flow
  • The AEM Brute Force Air Intake System is equipped with the innovative Dryflow oil-free air filter
  • TIG-welded fitting and brackets gives the Brute Force Air Intake System maximum durability
  • Carbon black powder-coated steel heat shield included (when applicable)
  • The Brute Force System includes the renowned AEM Power Spacer (when applicable)
  • The one-piece, four-layer cotton gauze AEM filter with urethane body delivers excellent filtration for the life of your vehicle
  • The Brute Force is legal in all 50 states and is C.A.R.B. exempt (or pending C.A.R.B exemption)
  • Easy to install with included soft-mount installation kit and comprehensive instructions
  • Your AEM Brute Force Air Intake System is backed by a Lifetime Warranty

Description:
Take on heavy loads, climb steep grades or enter the passing lane with brute force - the Brute Force air intake system by AEM, that is.

Everything about the Brute Force Air Intake System, from the 6061 mandrel-bent aluminum tubing to the AEM Power Spacer (when applicable) is tuned in length and diameter to optimize the performance of your specific engine. What's more, the power junkies down at AEM extensively test and tweak each Brute Force application on the dyno. That way, the intake system is certain to pack the most punch at every throttle angle across the RPM range.

AEM's Brute Force comes equipped with the innovative and easy to maintain oil-free Dryflow filter. It never needs oiling, is stronger than traditional cotton-gauze filters and delivers better flow than any air filter on the market.

The Brute Force is legal in all 50 states and won't void vehicle warranties. Installation is a breeze. Get tough on your engine's performance and use Brute Force!

Notes:
Emissions-related parts for new model year vehicles may be in "pending" status for C.A.R.B. certification. Earning certification takes time, but will be complete before your new vehicle's first smog check.

 

    94-02 Dodge Ram Brute Force Air Induction System
94-02 Dodge Ram Brute Force Air Induction System
94-02 Dodge Ram Brute Force Air Induction System
Part #: 21-8204DC
Our Price: $288.98

Buy Now

Fits: 94-02 Dodge Ram Diesel

5.9L Cummins

Product Style: AEM Brute Force Intake System
Color: Gunmetal Gray

Replacement Filter: 21-2059DK

 

AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.

Features:

  • The AEM Brute Force Air Intake System is custom-designed and tuned for your specific truck or SUV large displacement engine
  • The Brute Force is crafted in the USA
  • CNC Mandrel-bent 6061 aluminum tubing guarantees the Brute Force has optimum flow
  • The AEM Brute Force Air Intake System is equipped with the innovative Dryflow oil-free air filter
  • TIG-welded fitting and brackets gives the Brute Force Air Intake System maximum durability
  • Carbon black powder-coated steel heat shield included (when applicable)
  • The Brute Force System includes the renowned AEM Power Spacer (when applicable)
  • The one-piece, four-layer cotton gauze AEM filter with urethane body delivers excellent filtration for the life of your vehicle
  • The Brute Force is legal in all 50 states and is C.A.R.B. exempt (or pending C.A.R.B exemption)
  • Easy to install with included soft-mount installation kit and comprehensive instructions
  • Your AEM Brute Force Air Intake System is backed by a Lifetime Warranty

Prices are subject to change without notice.
Cyclone Diesel Performance Parts

Ford | Dodge | GM/Chevy

Dealers | Feedback

Return Policy

Web Design By TXprogrammer
Send mail to webmaster@cyclonediesel.com with questions or comments about this web site.
Cyclone Diesel Performance
Last modified: 07/12/2012