Cyclone Diesel Performance Diesel Performance Parts

High Tech Turbo

Here are a few random products from your menu choice.


Order Hotline
1-800-697-0194

All Other Inquires Contact
us at Dallas Metro
972-562-9274

 
For a more extensive search and listing of all of our products. Please visit our on-line store.
    Quick Diesel 64 (3rd Gen.) 04.5-06
Quick Diesel 64 (3rd Gen.) 04.5-06
Quick Diesel 64 (3rd Gen.) 04.5-06
Part #: 2464359
Our Price: $1,701.00

Buy Now

HT-2464359 - Quick Diesel 64 (3rd Gen.) 04.5-06


Quickspool Turbo
14 cm Turbine Housing
For trucks with 525-575 Horsepower.
04.5-06 Trucks Require a Boost Control Resistor. (Part Number - HTBR)

    Super Stock 62 (3rd Gen.)
Super Stock 62 (3rd Gen.)
Super Stock 62 (3rd Gen.)
Part #: 2462359
Our Price: $1,606.50

Buy Now

HT-2462359 - Super Stock 62 (3rd Gen.)


Quickspool Turbo
14 cm Turbine Housing
For trucks with 475-575 Horsepower.
04.5-06 Trucks Require a Boost Control Resistor. (Part Number - HTBR)

    Super Stock 62 (2nd Gen.)
Super Stock 62 (2nd Gen.)
Super Stock 62 (2nd Gen.)
Part #: 2462257
Our Price: $1,575.50

Buy Now

HT-2462257 - Super Stock 62 (2nd Gen.)

Quickspool Turbo
14 cm turbine housing
For trucks with 475-575 Horsepower.

    HX40 4\" Downpipe
HX40 4\
HX40 4\" Downpipe
Part #: DP43
Our Price: $162.00

Buy Now
HX40 Downpipe & Clamp.
    Boost Control Resistor
Boost Control Resistor
Boost Control Resistor
Part #: HTBR
Our Price: $31.50

Buy Now
Boost Control Resistor For 2004.5 and newer Dodge Cummins. (High Tech Turbo)
    Pro Street 66 (3rd Gen.)
Pro Street 66 (3rd Gen.)
Pro Street 66 (3rd Gen.)
Part #: 2466369
Our Price: $1,795.50

Buy Now
Quickspool Turbo
14 cm Turbine Housing
For trucks with 575-675 Horsepower.
04.5-06 Trucks Require a Boost Control Resistor. (Part Number - HTBR)
    Super Stock 62 (3rd Gen.)
Super Stock 62 (3rd Gen.)
Super Stock 62 (3rd Gen.)
Part #: 2462359
Our Price: $1,606.50

Buy Now
Quickspool Turbo
14 cm Turbine Housing
For trucks with 475-575 Horsepower.
04.5-06 Trucks Require a Boost Control Resistor. (Part Number - HTBR)
    Pro Street 66 (2nd Gen.)
Pro Street 66 (2nd Gen.)
Pro Street 66 (2nd Gen.)
Part #: 2466267
Our Price: $1,768.50

Buy Now
Quickspool Turbo
14 cm Turbine Housing
For trucks with 575-675 Horsepower.
    Quick Diesel 64 (2nd Gen.)
Quick Diesel 64 (2nd Gen.)
Quick Diesel 64 (2nd Gen.)
Part #: 2464257
Our Price: $1,674.00

Buy Now
Quickspool Turbo
14 cm Turbine Housing
For trucks with 525-575 Horsepower.
    Super Stock 62 (2nd Gen.)
Super Stock 62 (2nd Gen.)
Super Stock 62 (2nd Gen.)
Part #: 2462257
Our Price: $1,575.50

Buy Now
Quickspool Turbo
14 cm turbine housing
For trucks with 475-575 Horsepower.
    24V Manifold install kit
24V Manifold install kit
24V Manifold install kit
Part #: HTPMSINS24
Our Price: $75.00

Buy Now
A complete mounting kit

The kit includes:
Head to manifold gaskets
Manifold to turbo gasket
Turbo oil drain gasket
Turbo mounting studs
Turbo mounting bolts
Turbo mounting nuts

HPC coating is also available $150.
    12V Manifold install kit
12V Manifold install kit
12V Manifold install kit
Part #: HTPMSINS12
Our Price: $75.00

Buy Now
A complete mounting kit

The kit includes:
Head to manifold gaskets
Manifold to turbo gasket
Turbo oil drain gasket
Turbo mounting studs
Turbo mounting bolts
Turbo mounting nuts

HPC coating is also available $150.
    Quickspool Pulse Manifold 12V
Quickspool Pulse Manifold 12V
Quickspool Pulse Manifold 12V
Part #: HTPM12
Our Price: $495.00

Buy Now
THE QUICKSPOOL HTPM PULSE MANIFOLD FOR DODGE CUMMINS

Introducing the new 3-piece performance manifold - 1988-2002 - $425
*Made in USA
*12 and 24 vlave styles - Port matched for each version.
*Tuned balanced flow design.
*Nominal wall thickness .300"
*This manifold flows exhaust more evenly than other manifolds out there.
*Comes drilled and tapped for a pyrometer (pipe plugs installed).

Complete mounting kit available.
    Quickspool Pulse Manifold 24V
Quickspool Pulse Manifold 24V
Quickspool Pulse Manifold 24V
Part #: HTPM24
Our Price: $495.00

Buy Now
THE QUICKSPOOL HTPM PULSE MANIFOLD FOR DODGE CUMMINS

Introducing the new 3-piece performance manifold - 1988-2002 - $425
*Made in USA
*12 and 24 vlave styles - Port matched for each version.
*Tuned balanced flow design.
*Nominal wall thickness .300"
*This manifold flows exhaust more evenly than other manifolds out there.
*Comes drilled and tapped for a pyrometer (pipe plugs installed).

Complete mounting kit available.
    4 inch Intake Hose
4 inch Intake Hose
4 inch Intake Hose
Part #: HTPSHOSE
Our Price: $90.00

Buy Now
4 inch turbo inlet hose for use with the Ball Buster Ford turbo. Includes clamps.
    HTPS Ball Buster
HTPS Ball Buster
HTPS Ball Buster
Part #:
Our Price: $1,350.00

Buy Now
The HTPS Ford Powerstroke Performance Turbo for Late 99 - 02 Drop-in replacement

This is a completely redesigned turbo. There is nothing "stock" about it. Each housing was cast from new molds and machined to new specifications for the larger turbine and compressor wheels.

FEATURES:

*Large ported shroud compressor with a 10mm larger exducer for flow increases exceeding 30%. The compressor wheel is larger and flows about the same as the Garrett ball-bearing turbo.
*1.00 T. Hsg. instead of the stock .84. (For lower drive pressures and extended top-end horsepower.)
*The stock Powerstroke turbo has a baseline setting of just a few pounds and the computer controls pressure output from that base. This actuator has a 20 lb. base setting and can be adjusted from there since the turbo is easily capable of withstanding more pressure.
*360 degree thrust bearing and the shaft shank that is 5/16" in diameter instead of original 1/4". This gives you the strength and durability you need.
This turbo, with no other modifications has been shown to drop EGT's by 350 degrees.
With a 110 hp chip and a free flowing intake and exhaust has revealed HP increases of 175 HP over stock with modest boost pressures. This turbo requires less drive pressures and less boost pressure to make the same amount or more horsepower than the Garrett ball-bearing turbo. As a turbocharger remanufacturer, the best thing about this turbo is that it cost much less down the road when it comes to repairs. Have you found many rebuilders who will rebuild your Garrett ball-bearing turbo? Have you picked yourself up off the floor yet after learning the cost of these repairs? With this turbo you get the air you need as well as the spool-up you've come to expect.
The perfect replacement for your stock, ATS or Garrett ball-bearing turbo. Price is $1350 We require a $150.00 refundable core deposit. Late 99-2002 cores and ball-bearing turbo cores are acceptable.

This turbo features a 4" intake, so unless you already have this hose, you'll want to purchase a 4" intake hose w/clamp, add $90
    HTB2/66 2nd Gen Sled Puller
HTB2/66 2nd Gen Sled Puller
HTB2/66 2nd Gen Sled Puller
Part #: 1266267
Our Price: $1,593.00

Buy Now
Our HTB turbo series features very strong, high-flow turbos for aftercooled Dodge Cummins engines. With a 4" exhaust system, free-flowing air box and fuel enough to burn, 350-625 HP is the comfort range for these turbos. The HTB line-up features extremely durable and responsive chargers. Even after the initial quick spool-up, our HTB turbos build boost even quicker than other hybrid turbos so that there is plenty of boost at low-end, for towing and, well, for sheer fun. The result is minimal smoke as well as even lower EGT's. We offer 4 compressor choices culminating in the 66mm inducer of Sled Puller. You have a choice of two different high-flow wastegated turbine housing set-ups as well. You can get great spool-up. You can get drive pressures down to 1:1 ratio at 45 lbs boost. AN IMPORTANT FACTOR TO CONSIDER WITH YOUR TURBO PURCHASE IS INEXPENSIVE UPGRADABILITY. WE DON'T WANT YOU TO GROW OUT OF YOUR TURBO IN 6 MONTHS. Our turbos can grow right along with your horsepower needs. When you send in your HTBG, HTB2 or HTB2/64, we will upgrade the compressor to the next step up for only $200. This way you can't go wrong. Your don't have to purchase a turbo that is too big for you and you don't have to risk getting one too small. We also offer turbine housing upgrades. Often we can take your HTB 12cm2 turbine housing in trade for a 14cm2 housing (or 14 for 12) for just $150.00. Also, we can often machine the outlet flanges to different styles. Often we can offer upgrades and improvements for "B-1" turbos, Schwitzer S300G turbos and "Super B" turbos. Don't feel stuck. Ask us about these upgrade opportunities. Keeping EGT's in check (1400 degrees), our customers most often report horsepower/torque in the following range for these models: HTBG - 350-425 HP 950 ft. lbs. torque HTB2 - 450-500 HP 1050 ft. lbs. torque HTB2/64 - 500-550 HP 1150 ft. lbs. torque (KILLER B-2) HTB2/66 - 550-600 HP 1225 ft. lbs. torque (SLED PULLER 66) These turbos feature ported shroud compressor housings, well as adjustable wastegate actuators set by our shop at about 40 lbs psi. Keep in mind that boost equates to turbine speed and once you exceed "safe" boost levels of a turbo, any turbo will become a candidate for failure. Engine head gaskets and other components are at risk as boost levels approach 50 lbs. Unlike the Schwitzer S300G, we sell our HTB2 with a choice of 12 or 14 quickspool modified turbine housings. We also give you the choice of turbine outlet flanges (standard HTB2, HX40 style 4" flange or 3rd gen flange). Other mods include an adjustable wastegate actuator and heavy duty bearings for durability.
    HTB2/64 2nd Gen Killer B2
HTB2/64 2nd Gen Killer B2
HTB2/64 2nd Gen Killer B2
Part #: 1264257
Our Price: $1,489.50

Buy Now
Our HTB turbo series features very strong, high-flow turbos for aftercooled Dodge Cummins engines. With a 4" exhaust system, free-flowing air box and fuel enough to burn, 350-625 HP is the comfort range for these turbos. The HTB line-up features extremely durable and responsive chargers. Even after the initial quick spool-up, our HTB turbos build boost even quicker than other hybrid turbos so that there is plenty of boost at low-end, for towing and, well, for sheer fun. The result is minimal smoke as well as even lower EGT's. We offer 4 compressor choices culminating in the 66mm inducer of Sled Puller. You have a choice of two different high-flow wastegated turbine housing set-ups as well. You can get great spool-up. You can get drive pressures down to 1:1 ratio at 45 lbs boost. AN IMPORTANT FACTOR TO CONSIDER WITH YOUR TURBO PURCHASE IS INEXPENSIVE UPGRADABILITY. WE DON'T WANT YOU TO GROW OUT OF YOUR TURBO IN 6 MONTHS. Our turbos can grow right along with your horsepower needs. When you send in your HTBG, HTB2 or HTB2/64, we will upgrade the compressor to the next step up for only $200. This way you can't go wrong. Your don't have to purchase a turbo that is too big for you and you don't have to risk getting one too small. We also offer turbine housing upgrades. Often we can take your HTB 12cm2 turbine housing in trade for a 14cm2 housing (or 14 for 12) for just $150.00. Also, we can often machine the outlet flanges to different styles. Often we can offer upgrades and improvements for "B-1" turbos, Schwitzer S300G turbos and "Super B" turbos. Don't feel stuck. Ask us about these upgrade opportunities. Keeping EGT's in check (1400 degrees), our customers most often report horsepower/torque in the following range for these models: HTBG - 350-425 HP 950 ft. lbs. torque HTB2 - 450-500 HP 1050 ft. lbs. torque HTB2/64 - 500-550 HP 1150 ft. lbs. torque (KILLER B-2) HTB2/66 - 550-600 HP 1225 ft. lbs. torque (SLED PULLER 66) These turbos feature ported shroud compressor housings, well as adjustable wastegate actuators set by our shop at about 40 lbs psi. Keep in mind that boost equates to turbine speed and once you exceed "safe" boost levels of a turbo, any turbo will become a candidate for failure. Engine head gaskets and other components are at risk as boost levels approach 50 lbs. Unlike the Schwitzer S300G, we sell our HTB2 with a choice of 12 or 14 quickspool modified turbine housings. We also give you the choice of turbine outlet flanges (standard HTB2, HX40 style 4" flange or 3rd gen flange). Other mods include an adjustable wastegate actuator and heavy duty bearings for durability.
    HTB2 2nd Gen
HTB2 2nd Gen
HTB2 2nd Gen
Part #: HTB2
Our Price: $1,495.00

Buy Now
Our HTB turbo series features very strong, high-flow turbos for aftercooled Dodge Cummins engines. With a 4" exhaust system, free-flowing air box and fuel enough to burn, 350-625 HP is the comfort range for these turbos. The HTB line-up features extremely durable and responsive chargers. Even after the initial quick spool-up, our HTB turbos build boost even quicker than other hybrid turbos so that there is plenty of boost at low-end, for towing and, well, for sheer fun. The result is minimal smoke as well as even lower EGT's. We offer 4 compressor choices culminating in the 66mm inducer of Sled Puller. You have a choice of two different high-flow wastegated turbine housing set-ups as well. You can get great spool-up. You can get drive pressures down to 1:1 ratio at 45 lbs boost. AN IMPORTANT FACTOR TO CONSIDER WITH YOUR TURBO PURCHASE IS INEXPENSIVE UPGRADABILITY. WE DON'T WANT YOU TO GROW OUT OF YOUR TURBO IN 6 MONTHS. Our turbos can grow right along with your horsepower needs. When you send in your HTBG, HTB2 or HTB2/64, we will upgrade the compressor to the next step up for only $200. This way you can't go wrong. Your don't have to purchase a turbo that is too big for you and you don't have to risk getting one too small. We also offer turbine housing upgrades. Often we can take your HTB 12cm2 turbine housing in trade for a 14cm2 housing (or 14 for 12) for just $150.00. Also, we can often machine the outlet flanges to different styles. Often we can offer upgrades and improvements for "B-1" turbos, Schwitzer S300G turbos and "Super B" turbos. Don't feel stuck. Ask us about these upgrade opportunities. Keeping EGT's in check (1400 degrees), our customers most often report horsepower/torque in the following range for these models: HTBG - 350-425 HP 950 ft. lbs. torque HTB2 - 450-500 HP 1050 ft. lbs. torque HTB2/64 - 500-550 HP 1150 ft. lbs. torque (KILLER B-2) HTB2/66 - 550-600 HP 1225 ft. lbs. torque (SLED PULLER 66) These turbos feature ported shroud compressor housings, well as adjustable wastegate actuators set by our shop at about 40 lbs psi. Keep in mind that boost equates to turbine speed and once you exceed "safe" boost levels of a turbo, any turbo will become a candidate for failure. Engine head gaskets and other components are at risk as boost levels approach 50 lbs. Unlike the Schwitzer S300G, we sell our HTB2 with a choice of 12 or 14 quickspool modified turbine housings. We also give you the choice of turbine outlet flanges (standard HTB2, HX40 style 4" flange or 3rd gen flange). Other mods include an adjustable wastegate actuator and heavy duty bearings for durability.

Prices are subject to change without notice.
Cyclone Diesel Performance Parts

Ford | Dodge | GM/Chevy

Dealers | Feedback

Return Policy

Web Design By TXprogrammer
Send mail to webmaster@cyclonediesel.com with questions or comments about this web site.
Cyclone Diesel Performance
Last modified: 07/12/2012