| EVOLUTION FORD 7.3L 94-03 |
 |
EVOLUTION FORD 7.3L 94-03
Part #: 15000 Our Price: $359.20
 |
1994-2002 Powerstroke 7.3 Liter "EVOLUTION" OBDII Programmer, 60/145, 80/180, 110/255, HP/Torque, "STACKABLE", Speed/Rev Limiter Controls
With the introduction of the Evolution, Edge has entered a new realm of the aftermarket diesel industry. Contained in the tiny module is the capability not only to improve drivability and performance, but also the ability to display and clear trouble codes, remove the speed and rev limiters and adjust power levels. The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily switched back to stock at any time. The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up. See the Proof! |
|
| Ford 6.4L Juice w/Attitude |
 |
Ford 6.4L Juice w/Attitude
Part #: 10103 Our Price: $679.20
|
KEY FEATURES
• Up to 70 HP and 150 ft. lbs. of torque
• Easy to install
• Includes a custom pod that makes the unit look factory installed
• Choose from five different power levels and display a host of vehicle parameters
• Internet updatable
• Adjustable color screen
• Turbo Timer
• Retrieve and clear DTCs
• Tire size adjustment
Edge's latest Juice with Attitude release for the 6.4L Ford is Edge's most sophisticated and power-producing module to date. The Juice with Attitude dramatically improves the Ford 6.4L's driveability, towing capability, mileage and power.
The Juice plugs into the truck's factory connections in a matter of minutes and communicates directly with the engine's ECM, from which it receives vital engine data and fuel system information. This communication enables the Juice to provide smooth and precise power under any driving condition. The Attitude is the in-cab controller that controls the Juice and provides constant real-time updates on the truck's vital information. Using the Attitude, one can choose from five different power levels and shift on the fly.
The Juice with Attitude produces noticeable gains in horsepower and ft-lbs of torque — anywhere from 20-70 additional horsepower and 60-120 additional ft-lbs of torque to the rear wheels. It is the premium power module, controller and gauge package. The Attitude functions as a comprehensive gauge display by monitoring exhaust gas temperatures (EGTs), turbo boost, transmission slip and engine coolant temperature. The module even has built-in safety features to protect the truck, such as audible alerts and automatic defueling to prevent excessive EGT, boost levels and transmission slippage. It also displays 0-60 and quarter-mile times, adjusts for non-stock tire sizes and displays clears diagnostic trouble codes.
New with this module are a color-adjustable Attitude plus a custom pod to make the unit look like it came stock with the truck. Additionally, this is the first ever Internet-updateable module that Edge offers. Simply put, the Juice with Attitude is the simplest upgrade for the most driveable horsepower on the market.
SAFETY FEATURES
• Automatic defueling to prevent excessive EGT, boost and transmission slip
• Cold engine protection
• Turbo cool down
• User-adjustable audible alert settings
PERFORMANCE FEATURES
• 0-60 MPH and quarter-mile performance test
• Restore default options
• Module information display
IMPROVED DRIVEABILITY FEATURES
• Low end responsive adjust
• Shift defuel setting
HORSEPOWER LEVELS:
Level 0: Stock
Level 1: 20HP - 60 ft-lbs torque
Level 2: 30HP - 80 ft-lbs torque
Level 3: 45HP - 100 ft-lbs torque
Level 4: 60HP - 130 ft-lbs torque
Level 5: 70HP - 150 ft-lbs torque
|
|
| 2007.5-09 Dodge Juice w/Attitude 6.7L |
 |
2007.5-09 Dodge Juice w/Attitude 6.7L
Part #: 30107 Our Price: $799.20
|
2007.5-08 Dodge Juice w/Attitude 6.7L
KEY FEATURES:
• 6 on-the-fly Adjustable Power Levels
• Increase Torque up to 250 ft. lbs
• Up to An Additional 100 HP
• Encludes Turbo Timer
• Retrieve and Clear Trouble Codes
• Transmission Temperature
• Adjustable Low End Responsiveness
Shows True Speed - by taking into account changes in tire size
Cold Engine Protection
Edge’s premier product line, the Juice controls timing and duration of injector firing for your Dodge truck to deliver maximum performance, improved driveability and better fuel economy. The Juice with Attitude combination provides on-the-fly adjustability and monitoring capabilities putting knowledge at your fingertips. This plug-in module is easy to install and comes with factory style connections |
|
| 2006 Dodge 5.9L 24V 600 Series Attitude Monitor |
 |
2006 Dodge 5.9L 24V 600 Series Attitude Monitor
Part #: 33003 Our Price: $239.20
|
| Adjustability has never been easier or looked better. The Attitude in-cab controller combines sleek new engineering with cutting edge technology to provide state-of-the-art performance in adjusting levels and reading EGT and boost. With the addition of the controller to your Juice module, there is no longer a need for gauges. The backlit LCD display screen allows a clear reading of EGT temperatures, boost readings as well as a host of other parameters. With the push of a button, you can switch power levels and have adjustability on the fly. |
|
| EVOLUTION FORD 7.3L 94-03 |
|
EVOLUTION FORD 7.3L 94-03
Part #: 15000 Our Price: $359.20
|
1994-2002 Powerstroke 7.3 Liter "EVOLUTION" OBDII Programmer, 60/145, 80/180, 110/255, HP/Torque, "STACKABLE", Speed/Rev Limiter Controls
With the introduction of the Evolution, Edge has entered a new realm of the aftermarket diesel industry. Contained in the tiny module is the capability not only to improve drivability and performance, but also the ability to display and clear trouble codes, remove the speed and rev limiters and adjust power levels. The Evolution connects directly into the OBDII port underneath the dash. Once connected the stock software is downloaded and the new Evolution software is uploaded onto the trucks ECM. All modifications are done during this process and can be just as easily switched back to stock at any time. The Evolution was created with a small lightweight design that allows personalized control with the touch of a button. With a backlit LCD screen, seeing and reading codes has been made simple. The unit not only displays codes, but also displays a description of what these codes mean, which eliminates copying the code down and then finding a manual to look them up. |
|
| 1999-2003 Ford 7.3L Powerstroke Evolution |
 |
1999-2003 Ford 7.3L Powerstroke Evolution
Part #: 15001 Our Price: $479.20
|
FORD 7.3 POWERSTROKE 1999-2003
KEY FEATURES
• FIRST PROGRAMMER TO READ AND DISPLAY EGTs, probe included
• Provides in-cab display to monitor vital engine functions
• Additional 100 HP and 200 ft. lbs of torque
• Three power levels
• Ships with a custom designed pod
• Internet updateable (cable included)
• Displays and clear diagnostic trouble codes
• Adjustable LED backlight color
• Does 0-60 and Quarter mile performance tests with the drag strip Christmas tree lighting and reaction times
• Displays Alerts and Records such as RPM, MPH and EGT
• Datalogs vital engine information
• Simple installation
ADVANCED TUNING
• Able to adjust shift points/pressure
• Adjustable speed/rev limiter
PERFORMANCE TESTING
• 0-60 and Quarter mile performance tests with the drag strip Christmas tree lighting and reaction times
DATA STREAM
• Records 5 parameters for up to 60 seconds
• Viewable graph using available software
PIDS
The Evolution allows the user to view up to 4 PIDs at one time. There are 11 different PIDs to choose from. Below is a list and description of each:
• RPM (revolutions per minute) – Engine speed.
• MPH (miles per hour) – Note: Dash display may be +/-3 MPH off from the digital display due to mechanical differences in the spring, etc. used to control the gauge.
• ECT (engine coolant temperature) – Degrees F.
• BST (Boost Pressure) - PSI
• EGT (Exhaust Gas Temp) – Degrees F.
• EOT (Engine oil temperature) – Degrees F.
• TFT (Transmission fluid temperature) – Degrees F. (Automatic Trans ONLY. If you have a manual trans, the value displayed will be incorrect)
• IAT (Intake air temperature) – Degrees F.
• BARO (Barometric pressure) – PSI
• BAT (Battery voltage)
• DTC (Diagnostic trouble code count)
The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Evolution module. Power gains may vary based on vehicle and geographical location.
Level 0: Stock
Level 1 (Trans Only): 0 Horsepower - 0 Foot Pounds of Torque
Level 2: 60 Horsepower - 110 Foot Pounds of Torque
Level 3: 100 Horsepower - 200 Foot Pounds of Torque
Have an old Evolution? Do you want to upgrade? Call Edge's tech support to upgrade at a discounted price. |
|
| Insight - Dodge 2006+ |
 |
Insight - Dodge 2006+
Part #: 83400 Our Price: $299.00
|
Comprehensive Gauge Display:
The Insight is an easy-to-install standalone multi-gauge display. With what would otherwise cost thousands of dollars and take hours to install, the Insight provides inexpensively and instantly. Some of its many features and benefits include:
• One simple connection to the vehicle’s OBDII (diagnostic) port
• Displays more than 100 different vehicle parameters
• View parameters in either bar or graph form
• Built-in safety features: user-defined visual and audible alerts
Scan Tool and Data-Logging Capabilities:
Capture and record even more information about the vehicle’s performance with the Insight’s data-logging and scan tool features.
• Display and clear diagnostic trouble codes with full text description
• Capture and record up to five parameters for 90 seconds
• Display peak values such as speed and RPM on a PC (software included)
• Performance testing: 0-60 and quarter-mile times
Bonus Features:
In addition to all of the parameters that can be displayed, diesel owners can purchase a thermocouple probe that connects to an additional sensor port on the OBDII connection and display EGT (Exhaust Gas Temperature). Or the same connection can be used to input a wideband 02 sensor. And for owners of new diesels with diesel particulate filter (DPF) traps, the Insight displays DPF regeneration status.
With its gauges, built-in safety features, and scan-tool and data-logging capabilities, the Insight is a valuable, comprehensive tool. Also, all the latest files and product information can be downloaded via the Internet, which means you never have to send your unit in to get re-flashed. But perhaps best of all is the Insight’s ease of use. With touch-of-a-button control, it’s never been easier to gain insight into your vehicle’s vital engine information. |
|
| Insight - Chevy 2006+ |
|
Insight - Chevy 2006+
Part #: 83400 Our Price: $299.00
|
Comprehensive Gauge Display:
The Insight is an easy-to-install standalone multi-gauge display. With what would otherwise cost thousands of dollars and take hours to install, the Insight provides inexpensively and instantly. Some of its many features and benefits include:
• One simple connection to the vehicle’s OBDII (diagnostic) port
• Displays more than 100 different vehicle parameters
• View parameters in either bar or graph form
• Built-in safety features: user-defined visual and audible alerts
Scan Tool and Data-Logging Capabilities:
Capture and record even more information about the vehicle’s performance with the Insight’s data-logging and scan tool features.
• Display and clear diagnostic trouble codes with full text description
• Capture and record up to five parameters for 90 seconds
• Display peak values such as speed and RPM on a PC (software included)
• Performance testing: 0-60 and quarter-mile times
Bonus Features:
In addition to all of the parameters that can be displayed, diesel owners can purchase a thermocouple probe that connects to an additional sensor port on the OBDII connection and display EGT (Exhaust Gas Temperature). Or the same connection can be used to input a wideband 02 sensor. And for owners of new diesels with diesel particulate filter (DPF) traps, the Insight displays DPF regeneration status.
With its gauges, built-in safety features, and scan-tool and data-logging capabilities, the Insight is a valuable, comprehensive tool. Also, all the latest files and product information can be downloaded via the Internet, which means you never have to send your unit in to get re-flashed. But perhaps best of all is the Insight’s ease of use. With touch-of-a-button control, it’s never been easier to gain insight into your vehicle’s vital engine information. |
|
| Insight - Ford 2004+ F-150's |
|
Insight - Ford 2004+ F-150's
Part #: 83400 Our Price: $299.00
|
Comprehensive Gauge Display:
The Insight is an easy-to-install standalone multi-gauge display. With what would otherwise cost thousands of dollars and take hours to install, the Insight provides inexpensively and instantly. Some of its many features and benefits include:
• One simple connection to the vehicle’s OBDII (diagnostic) port
• Displays more than 100 different vehicle parameters
• View parameters in either bar or graph form
• Built-in safety features: user-defined visual and audible alerts
Scan Tool and Data-Logging Capabilities:
Capture and record even more information about the vehicle’s performance with the Insight’s data-logging and scan tool features.
• Display and clear diagnostic trouble codes with full text description
• Capture and record up to five parameters for 90 seconds
• Display peak values such as speed and RPM on a PC (software included)
• Performance testing: 0-60 and quarter-mile times
Bonus Features:
In addition to all of the parameters that can be displayed, diesel owners can purchase a thermocouple probe that connects to an additional sensor port on the OBDII connection and display EGT (Exhaust Gas Temperature). Or the same connection can be used to input a wideband 02 sensor. And for owners of new diesels with diesel particulate filter (DPF) traps, the Insight displays DPF regeneration status.
With its gauges, built-in safety features, and scan-tool and data-logging capabilities, the Insight is a valuable, comprehensive tool. Also, all the latest files and product information can be downloaded via the Internet, which means you never have to send your unit in to get re-flashed. But perhaps best of all is the Insight’s ease of use. With touch-of-a-button control, it’s never been easier to gain insight into your vehicle’s vital engine information. |
|
| Insight - Dodge 2006+ Hemi |
|
Insight - Dodge 2006+ Hemi
Part #: 83400 Our Price: $299.00
|
Comprehensive Gauge Display:
The Insight is an easy-to-install standalone multi-gauge display. With what would otherwise cost thousands of dollars and take hours to install, the Insight provides inexpensively and instantly. Some of its many features and benefits include:
• One simple connection to the vehicle’s OBDII (diagnostic) port
• Displays more than 100 different vehicle parameters
• View parameters in either bar or graph form
• Built-in safety features: user-defined visual and audible alerts
Scan Tool and Data-Logging Capabilities:
Capture and record even more information about the vehicle’s performance with the Insight’s data-logging and scan tool features.
• Display and clear diagnostic trouble codes with full text description
• Capture and record up to five parameters for 90 seconds
• Display peak values such as speed and RPM on a PC (software included)
• Performance testing: 0-60 and quarter-mile times
Bonus Features:
In addition to all of the parameters that can be displayed, diesel owners can purchase a thermocouple probe that connects to an additional sensor port on the OBDII connection and display EGT (Exhaust Gas Temperature). Or the same connection can be used to input a wideband 02 sensor. And for owners of new diesels with diesel particulate filter (DPF) traps, the Insight displays DPF regeneration status.
With its gauges, built-in safety features, and scan-tool and data-logging capabilities, the Insight is a valuable, comprehensive tool. Also, all the latest files and product information can be downloaded via the Internet, which means you never have to send your unit in to get re-flashed. But perhaps best of all is the Insight’s ease of use. With touch-of-a-button control, it’s never been easier to gain insight into your vehicle’s vital engine information. |
|
|
